Problems & fixes, Arena Breakout Infinite

• Use launch method 1 (Standard) and do not enable features marked as "risk".
• Play only on a fresh account. Register with a completely different email address , this has been confirmed to reduce ban risk.
• Keep your VPN active at all times, including during account registration , do not disconnect it.
• Disable TPM in BIOS to reduce hardware-level ban risk.
• Avoid speedhack if you want longer session stability.

The archive password for the diagnostic utility is sordum. Download the Sordum utility, launch it, click Search, and send a screenshot of the results to support.

Make sure your antivirus is fully removed or disabled (Kaspersky, Norton, Windows Defender). If a third-party antivirus is installed, uninstall it via Programs and Features and reboot.

Move all loader files to your Desktop and run the .exe from there. If the issue persists, re-download the loader from the site and launch it as Administrator.

The archive password for the diagnostic utility is sordum. Download the Sordum utility, launch it, click Search, and send a screenshot of the results to support.

Make sure your antivirus is fully removed or disabled (Kaspersky, Norton, Windows Defender). If a third-party antivirus is installed, uninstall it via Programs and Features and reboot.

Move all loader files to your Desktop and run the .exe from there. If the issue persists, re-download the loader from the site and launch it as Administrator.

This is a common issue caused by Windows driver security components. Follow these steps:

• Download the Sordum utility (archive password: sordum), run it, click Search, and wait for it to finish.
• Apply the win_driver_OFF.reg file provided by support — it disables Windows driver signature enforcement. Reboot your PC afterwards.
• Make sure User Account Control (UAC) is disabled — the loader handles this automatically, but verify it manually if needed.
• If the issue persists, run sc query vgk, sc query faceit, sc query wdfilter in CMD and send a screenshot to support.

These errors indicate a previous load did not complete cleanly, or conflicting anticheat software is present on the system.

• Uninstall Vanguard (Valorant Anti-Cheat) and FaceIt AC if they are installed.
• Download the Sordum utility (archive password: sordum), run it, click «Search», and wait for it to finish.
• Perform a full PC restart and make sure Windows Defender is disabled.
• Launch the loader as Administrator.

The most common cause is ISP-level blocking of the activation servers. Connect to a VPN and try launching the loader again. In your VPN settings, switch to Proxy mode and pick the server with the lowest ping.

If that does not help, reboot your PC and try again. If the loader still fails to load, third-party software or Windows settings may be interfering — contact support.

The most common cause is ISP-level blocking of the activation servers. Connect to a VPN and try launching the loader again. In your VPN settings, switch to Proxy mode and pick the server with the lowest ping.

If that does not help, reboot your PC and try again. If the loader still fails to load, third-party software or Windows settings may be interfering — contact support.

Loader connection errors are usually caused by ISP-level blocking. Try the following steps:

• Enable a VPN (any country), launch the loader and click Inject. Once injected successfully, disable the VPN before starting the game.
• If VPN does not help: download the networkmanager.zip utility, run it, select «Find Best IP» and click Apply. Then try launching the loader again.

After entering the key you must confirm your request in the Telegram bot @vata_approval_bot: open the bot, send your login, and wait for the developer to approve it. The Run Software button only becomes active after approval.

If the bot has already approved you but the button is still inactive , sync your PC clock and try a VPN.

This is typically caused by leftover files from previous sessions or corrupted Windows system components. Follow these steps in order:

• Download and run the Sordum utility (archive password: sordum), click Search, and wait for it to finish — it removes leftover directories from prior loader runs.
• Open Command Prompt as Administrator and run in sequence: DISM /Online /Cleanup-Image /RestoreHealth, then sfc /scannow. Wait for each to complete, then reboot.
• If the issue persists, try switching your DNS or changing your VPN server/location, then attempt the loader again.
• If nothing helps, record a video of the full launch process and send it to support.

This is typically caused by leftover files from previous sessions or corrupted Windows system components. Follow these steps in order:

• Download and run the Sordum utility (archive password: sordum), click Search, and wait for it to finish — it removes leftover directories from prior loader runs.
• Open Command Prompt as Administrator and run in sequence: DISM /Online /Cleanup-Image /RestoreHealth, then sfc /scannow. Wait for each to complete, then reboot.
• If the issue persists, try switching your DNS or changing your VPN server/location, then attempt the loader again.
• If nothing helps, record a video of the full launch process and send it to support.

• When injecting, keep the game window active (in focus), not the loader window.
• Remove any automatic memory-cleaning tools (e.g. MemReduct) — they conflict with the injector.
• Reinstall all Visual C++ Redistributable packages: uninstall all existing versions and download fresh ones.
• If the error persists, make sure Core Isolation / Memory Integrity is disabled in Windows: Settings → Windows Security → Device Security → Core Isolation.

• When injecting, keep the game window active (in focus), not the loader window.
• Remove any automatic memory-cleaning tools (e.g. MemReduct) — they conflict with the injector.
• Reinstall all Visual C++ Redistributable packages: uninstall all existing versions and download fresh ones.
• If the error persists, make sure Core Isolation / Memory Integrity is disabled in Windows: Settings → Windows Security → Device Security → Core Isolation.

System freeze when entering the key is usually caused by HDR or antivirus conflicts. Do the following in order:

• Disable HDR in Windows display settings.
• Disable Windows Defender and make sure any third-party antivirus (e.g. Kaspersky) is fully uninstalled.
• Run the Sordum utility to disable system security drivers, then reboot your PC.

The most common cause is third-party antivirus or security software blocking the loader. Completely uninstall 360 Total Security, Vanguard (Valorant anti-cheat — must be uninstalled, not just disabled), and any other third-party antivirus.

After removal: download the Sordum utility (archive password — sordum), run it, click Search, and wait for it to finish. Then reboot your PC and try launching the loader again.

If errors persist, send a screenshot of your installed programs list to support. As a last resort, a clean Windows reinstall resolves the issue.

Third-party antivirus software (especially Kaspersky and Norton) conflicts with the launcher. You need to fully uninstall the antivirus — disabling it is not enough.

• Uninstall Kaspersky / Norton via "Programs and Features" or the vendor's dedicated removal tool.
• Restart your PC after uninstalling.
• Make sure no antivirus components remain in the installed programs list.
• Windows Defender is sufficient — disable real-time protection temporarily if prompted.

If the loader throws an error and closes, follow these steps in order:

• Run the Sordum utility (password: sordum), click Search, and send a screenshot , this helps detect hidden antivirus or security services.
• Open Command Prompt as Administrator and run: DISM /Online /Cleanup-Image /RestoreHealth, then sfc /scannow , this repairs system files.
• Try launching with a VPN enabled.
• Make sure you are not using a permanent HWID spoofer , it corrupts system identifiers and can prevent the loader from working.

If none of these steps help, reinstall Windows and try again.

The archive password is: sordum.

Launch order matters: start the loader first and wait for the prompt to open the game, then launch the game , not the other way around. Do not start the product while the game is already running.

If the order is correct and the issue persists, download the Sordum utility (archive password: sordum), run it, click Search, and send a screenshot of the results to support , this helps diagnose conflicts on your system.

Launch order matters: start the loader first and wait for the prompt to open the game, then launch the game , not the other way around. Do not start the product while the game is already running.

If the order is correct and the issue persists, download the Sordum utility (archive password: sordum), run it, click Search, and send a screenshot of the results to support , this helps diagnose conflicts on your system.

Launch order matters: start the loader first and wait for the prompt to open the game, then launch the game , not the other way around. Do not start the product while the game is already running.

If the order is correct and the issue persists, download the Sordum utility (archive password: sordum), run it, click Search, and send a screenshot of the results to support , this helps diagnose conflicts on your system.

Launch order matters: start the loader first and wait for the prompt to open the game, then launch the game , not the other way around. Do not start the product while the game is already running.

If the order is correct and the issue persists, download the Sordum utility (archive password: sordum), run it, click Search, and send a screenshot of the results to support , this helps diagnose conflicts on your system.

Reinstall the loader and update your GPU drivers , this resolves the issue in most cases. If the loader still closes on its own, try launching with a VPN enabled, then fully reboot your PC.

If nothing helps, the developers may be actively working on a fix , check with support for the current status.

Reinstall the loader and update your GPU drivers , this resolves the issue in most cases. If the loader still closes on its own, try launching with a VPN enabled, then fully reboot your PC.

If nothing helps, the developers may be actively working on a fix , check with support for the current status.

Reinstall the loader and update your GPU drivers , this resolves the issue in most cases. If the loader still closes on its own, try launching with a VPN enabled, then fully reboot your PC.

If nothing helps, the developers may be actively working on a fix , check with support for the current status.

Reinstall the loader and update your GPU drivers , this resolves the issue in most cases. If the loader still closes on its own, try launching with a VPN enabled, then fully reboot your PC.

If nothing helps, the developers may be actively working on a fix , check with support for the current status.

Check that your PC clock is synchronized: Settings → Time and Language → Sync now. An incorrect system time is a common cause of launch failures.

Also try enabling a VPN. Make sure the loader and client are in the same folder on the USB drive and are launched from the main PC where Arena Breakout Infinite is installed.

After reinstalling the OS, open the Rebind tab in the loader and re-link your device. If that does not help , contact support with the email address used during initial registration and an operator will forward the request to the developer.

Do not register a new account , multi-accounting is prohibited and may result in a ban.

Switch the Arena Breakout Infinite display mode from fullscreen to windowed mode (not borderless/fullscreen-windowed , true windowed). Then relaunch the loader. If the issue persists, record the full launch process and contact support.

Switch Arena Breakout Infinite to windowed mode in the graphics settings , the cheat requires this mode for the inject to work correctly. After changing the mode, restart both the game and the loader.

The most likely cause is a non-standard (modified or stripped) Windows build. The loader requires a clean, official Windows installation.

• Reinstall Windows using an official image.
• As a temporary workaround, try launching the loader with a VPN enabled.
• Make sure Vanguard (Valorant anti-cheat) is fully uninstalled — it can interfere with the launch.

The most likely cause is a non-standard (modified or stripped) Windows build. The loader requires a clean, official Windows installation.

• Reinstall Windows using an official image.
• As a temporary workaround, try launching the loader with a VPN enabled.
• Make sure Vanguard (Valorant anti-cheat) is fully uninstalled — it can interfere with the launch.

Run a system file repair: open Command Prompt as Administrator and execute two commands — first DISM /Online /Cleanup-Image /RestoreHealth, then sfc /scannow. After that, make sure Fast Boot is disabled in BIOS/UEFI, then reboot.

If the issue persists, a clean Windows reinstall is required. Use the Pro edition only — Home versions may lack required components for the loader to function correctly.

Some browsers have built-in protection that blocks downloading and running loader executable files.

• Open browser settings and disable the built-in protection feature (e.g. Protect / Safe Browsing).
• If the file still won't download from the main server, install the MEGA extension and download via it.
• Note: each user gets an individual launcher file — it cannot be shared with others.

If the loader throws an error on startup, first try connecting a VPN — the VPN is only required during the download and activation stage; once the loader is running you can disconnect it.

If VPN does not help, check the following in BIOS and Windows settings:

• Secure Boot must be disabled in BIOS.
• Core Isolation (Memory Integrity) must be disabled. Find it in Windows Security → Device Security → Core Isolation.

After changing these settings, reboot and try launching the loader again.

Yes, this is a false positive. The loader is protected with obfuscation and VMProtect — standard anti-reverse-engineering measures that antivirus software often flags as suspicious. The file is safe. Before launching, disable real-time protection in Windows Defender and add the loader folder to exclusions.

This error is usually caused by Windows Defender or a third-party antivirus interfering with the loader. Fully disable all antivirus protection before launching.

Also try connecting via VPN (NordVPN or similar paid service is recommended) as some ISPs may block the loader download. If VPN does not help, run the diagnostic tool (archive password sordum, click «Search») and send the screenshot to support.

After each reboot, Windows Defender or another antivirus may restore its settings and block the loader files. Make sure protection is disabled, then click Start Game in the loader again.

Also verify that Valorant Anti-Cheat (vgc / vanguard) is fully uninstalled , it conflicts with the loader.

Switch the game to windowed mode before launching the cheat , this is the first diagnostic step for silent crashes.

If the crash persists, record the entire launch process from start to finish (e.g., via OBS or built-in screen recorder) so support can identify the exact cause.

The cause is an incompatible Windows build. Windows 26H1 is a test/insider build and is currently unstable for this cheat.

Solution: reinstall Windows using build 25H2 (confirmed supported) or Windows 10. Do not update to unstable insider builds after installation.

After the cheat is injected, the USB flash drive disconnects from the system automatically. You do not need to remove it manually , it ejects on its own.

• Remove all cheat loaders from your PC and empty the Recycle Bin.
• Disable Memory Integrity in Windows Security → Device Security → Core Isolation.
• Run sfc /scannow in an elevated command prompt and wait for it to finish, then reboot.
• Download and launch the loader again.

If the error persists after all steps, try simply restarting your PC , in some cases the issue clears on its own.

The red indicator means your account has been flagged or encrypted by the game's anti-cheat system.

• Register a new account and use it for gameplay.
• If subscription time was lost due to the ban, contact support to request compensation.

Make sure you are inside an active match in Arena Breakout Infinite before opening the radar interface on your second device , the radar only displays data during a live game session.

If the screen is still white: reboot the second device and clear browser cookies, then reload the radar page.

If the browser blocks the download or the redirect does not trigger the file, contact support , an operator will send you a direct download link for the loader.

If the browser blocks the download or the redirect does not trigger the file, contact support , an operator will send you a direct download link for the loader.

Download the cheat archive. The archive password is: sordum.

• Extract the archive and run the executable.
• Click the Search button and wait for it to finish.
• You can then launch the game.

If the anti-cheat triggers immediately on game launch, the cause is usually not the cheat itself but the account status. The account has already been flagged by the anti-cheat system from previous sessions , the detection sticks to the account.

Switching to a fresh, clean account is the only resolution: on a new account the cheat launches without triggering detection.

The QNetworkReply::OperationCanceledError means the spoofer's activation server is blocked by your ISP. The solution is to launch the spoofer through a VPN.

If enabling VPN causes the cheat to disconnect from its own server, try a different VPN service or a different VPN server location , some servers do not interfere with the cheat's connection. You can also try this launch order: start the spoofer first (with VPN active), complete the spoofing process, then disable VPN and launch the cheat.

Make sure your system has exactly one EFI partition of 100 MB. If you previously created partitions manually via CMD or Disk Management, duplicates may exist , delete the extra one, keeping only one EFI partition.

Also confirm that virtualization (AMD-V / Intel VT-x) is enabled in BIOS. After fixing the partition and BIOS settings, reboot your PC and run the loader again.

If the loader fails to download or hangs , try connecting via VPN: your ISP may be blocking the update servers.

Disabling Defender through Windows Settings alone may not be enough , the system can re-enable it automatically. Use the utility included in the program archive to fully disable it. The archive password is sordum.

Make sure the cheat archive is opened with WinRAR , Windows' built-in extractor may not handle the password correctly. The archive password is listed in the product description.

Before launching the loader, disable real-time protection in Windows Defender (or your third-party antivirus) , otherwise the cheat files may be blocked or deleted on extraction.

Ensure the game is already running before starting the injector, and that the loader is launched as Administrator.

If the game runs fine without input but crashes immediately after any mouse movement or keypress, try the following steps:

• Sync your PC clock , open Date & Time settings and sync with the internet time server.
• Open Win+R → msinfo32, take a screenshot, and send it to support for hardware diagnostics.
• Disable display scaling and close unnecessary background applications that may interfere with the cheat.
• If nothing works, try a different game account , in at least one case this resolved the issue entirely.

Method 1 (Standard) is intended for looting and farming only , killing real players will trigger the "Dear Mercenary" warning (temporary restriction). Killing bots is generally allowed.

Method 2 (AEMU) provides full cheat functionality but is in testing/risk status, as clearly noted in the loader. Expect possible game crashes on load and a higher ban risk. Choose the method that matches your playstyle and monitor the changelog for updates.

VATA is a browser-based radar, not a traditional injectable cheat, so there is no Inject button. The loader runs on the main PC with Arena Breakout Infinite, and the radar interface is opened on a second device (laptop, phone, or second PC) in a browser using the link from the instructions.

Use the login and password you set during registration.

This issue is usually caused by display mode or scaling settings.

• Switch the game to windowed mode.
• Set Windows display scaling to 100%.
• Restart the cheat and the game after making these changes.

Open Windows Display Settings and set the display scaling to 100%. Restart the game afterwards , the ESP boxes will align correctly.

Method 2 carries a higher detection risk , this is noted in the product description. Using it can result in a ban.

Method 1 is safer, but is intended for loot highlighting only. Do not kill PVP players with Method 1 active.

Make sure you copy the key in full with no extra spaces at the beginning or end. If the error persists right after purchase, contact support and provide: a screenshot of the key from your payment confirmation, the key as plain text, and a screenshot of the error in the loader , the operator will forward this to the developer to verify activation.

Make sure you copy the key in full with no extra spaces at the beginning or end. If the error persists right after purchase, contact support and provide: a screenshot of the key from your payment confirmation, the key as plain text, and a screenshot of the error in the loader , the operator will forward this to the developer to verify activation.

Make sure you copy the key in full with no extra spaces at the beginning or end. If the error persists right after purchase, contact support and provide: a screenshot of the key from your payment confirmation, the key as plain text, and a screenshot of the error in the loader , the operator will forward this to the developer to verify activation.

Make sure you copy the key in full with no extra spaces at the beginning or end. If the error persists right after purchase, contact support and provide: a screenshot of the key from your payment confirmation, the key as plain text, and a screenshot of the error in the loader , the operator will forward this to the developer to verify activation.

After a reboot, a key can stop working due to a conflict with the spoofer or a changed system state. Contact support — an operator will issue a replacement key. To speed things up, provide your current key upfront.

After a reboot, a key can stop working due to a conflict with the spoofer or a changed system state. Contact support — an operator will issue a replacement key. To speed things up, provide your current key upfront.

If the cheat shows an HWID binding error (e.g. after reinstalling Windows), contact support and provide your activation key. The operator will manually reset the HWID.

Important: do not press the "Clean" button in the spoofer multiple times , repeated resets without a valid reason will not be granted.

Every hardware clean (spoof reset) causes the activation to drop , this is expected behavior for this product. Contact support and provide your key: the operator will manually re-activate it. This is a routine procedure and takes only a few minutes.

No, you do not need to re-download the loader. Simply enter the new key into the already installed loader and activate it.

A new personal link for re-submitting the application can only be issued by the seller. Write to the seller via the «Chat with seller» section on the oplata.info platform, describe the situation, and request a new link. A reply usually arrives within a few hours.

There are two main reasons a key may fail to activate:

• Software update in progress. Keys cannot be activated while the software is being updated. Wait for the update to finish and try again.
• Key already activated. If the key was previously activated on an account, it cannot be activated again. Make sure you are using a new, unused key.

The 'system changed' error appears when the spoofer alters hardware IDs after the key has already been bound. Fix: reboot your PC, then follow the strict launch order , cheat first, spoofer second, game last. Do not change this order.

If the error persists, contact support to reset the key binding to your current hardware profile.

Cryptocurrency payments (including BEP-20/USDT) are processed automatically by the Digiseller system and may take up to 30 minutes, sometimes longer. This is normal.

Track your payment status at oplata.info using your transaction. If it remains pending for an extended time, contact the seller directly through Digiseller with your TxID.

The AEMU method (method 2) is in testing/risk status , this is stated directly in the loader. Stability is not guaranteed. Until the developer releases a fix, switch to method 1 (Standard). Monitor the loader changelog for updates.

Enable virtualization directly in BIOS/UEFI , the Windows Task Manager entry only reflects the current state and may not appear if the feature is disabled at the BIOS level.

After enabling it, reboot and launch the loader again. Send a screenshot of the loader screen to support so they can confirm all parameters are correct.

The built-in spoofer in HYPER Arena Breakout has limited capability. For reliable account protection it is recommended to use a separate dedicated spoofer alongside the cheat.

If a ban has already occurred, you can investigate by running the cheat with only the spoofer active (no game features) on a test account to identify the source of detection.

An instant ban on game entry is a sign of a hardware ID (HWID) ban, not a cheat detection ban. The anti-cheat previously flagged your hardware.

Solution: to play with a cheat after an HWID ban, you need a spoofer (hardware ID spoofer). A new game account is also required.

Download the Sordum utility (archive password: sordum), run it and click Search. Wait for the scan to complete.

If nothing is found but the loader still will not start , antivirus is running in the background. Find and completely remove all security software, including Kaspersky and any hidden protection components.

If the loader displays a conflict error on startup, enter BIOS and disable virtualization (Virtualization Technology / VT-x / AMD-V). Then relaunch the loader.

Additionally, disable UAC (User Account Control) in Windows settings , this can also interfere with injection.

Check your Windows version: press Win+R, type winver and press Enter. Send the version and build number to support , this helps diagnose compatibility issues.

Mason requires Hyper-V to be enabled, while most external spoofers require it to be disabled. This creates a conflict when trying to use both simultaneously.

Recommended launch order: start Mason cheat first, then launch the external spoofer (only if it supports Hyper-V being on), then launch the game. If your spoofer is incompatible with Hyper-V, rely solely on Mason's built-in spoofing and skip the external one.

Some antivirus programs (e.g. McAfee) block the cheat even if they do not appear in the installed programs list.

• Download the Sordum utility; the archive password is: sordum.
• Launch it, click Search, and wait for the scan to finish.
• Remove all found antivirus components and restart your computer.

If the game runs fine without the cheat but crashes or blocks you with it active, a hardware ban (HWID ban) is likely. In that case:

• Create a new game account.
• Launch the cheat in no-spoofer mode while the situation is clarified.

Hardware ban notifications are not always sent by email , the absence of a message does not mean there is no ban.