Problems & fixes, Valorant

This error usually means the loader cannot reach the authorization server. Try the following steps in order:

• Enable a VPN , Warp 1.1.1.1 is recommended (free, download at warp.cloudflare.com). Other VPN services may also work; try different servers.
• Synchronize Windows time: Settings → Date & Time → "Sync now".
• Run the loader as Administrator.
• If nothing helps, restart your PC and try again. In extreme cases, a Windows reinstall resolved the issue.

The most common cause is that Discord is not running as administrator or its in-game overlay is disabled. Make sure Discord is launched with admin rights and that the Game Overlay is enabled in Discord settings. You should see the Discord overlay badge inside the game.

If that is already done , reboot your PC, delete the loader, re-download it, and launch it again as administrator.

A BSOD when launching Euphon is most often caused by incorrect virtualization settings or a conflict with Kernel Isolation.

• Open "Core Isolation" in Windows Search and disable "Memory Integrity".
• Make sure Hyper-V is enabled: Win+R → optionalfeatures → check "Hyper-V Platform", click OK.
• Open CMD as Administrator (the title bar should say "Administrator") and run: bcdedit /set hypervisorlaunchtype auto
• Restart your PC and try again.

This error is usually caused by Windows Defender or a third-party antivirus interfering with the loader. Fully disable all antivirus protection before launching.

Also try connecting via VPN (NordVPN or similar paid service is recommended) as some ISPs may block the loader download. If VPN does not help, run the diagnostic tool (archive password sordum, click «Search») and send the screenshot to support.

Anticheat errors and loader crashes when starting the game are typically resolved by enabling a VPN. Connect to a VPN, then relaunch the loader and the game.

Also ensure Windows Defender is disabled (e.g. via Defender Control), no third-party antivirus is running, and no unnecessary background software is active.

If after injection only the loader window appears and the cheat menu never shows, follow these steps:

• Download the Sordum utility (archive password: sordum).
• Run it, click Search, and wait for it to finish.
• Take a screenshot of the result, then repeat the loader launch procedure.

This clears conflicting processes that prevent the menu from appearing.

Download the Sordum utility, launch it, and click the Search button. Wait for the scan to finish, then send a screenshot of the result to support , this helps diagnose the cause of the error.

Use WinRAR to extract the archive. Archive password: sordum.

The HWID binding error occurs when your hardware configuration changes or a spoofer is used. Contact support to reset your HWID binding.

Always follow the correct launch order: run the spoofer first, then the cheat. If the spoofer does not require a reboot, the order may be reversed. Launching out of sequence will trigger the binding error again.

The archive password is sordum. After extracting, run the program, click Search, wait for it to finish, then take a screenshot of the result and send it to support.

If the loader still hangs, check for leftover traces of Kaspersky or any other antivirus , the built-in scanner may detect remnants even after a standard uninstall. Remove all components completely. If the issue persists, try launching the loader through a VPN. Valorant FULL + Skinchanger

If serial numbers remain unchanged, follow the complete procedure in order:

• Reinstall Windows with full formatting of all drives. Use Windows 10 22H2 (original, not a stripped build).
• Flash BIOS twice: first update to a newer version, then downgrade to a different older version (must be versions not previously used).
• On the clean Windows install, apply all updates and update GPU drivers via NVIDIA App.
• Before running the spoofer, disable GPU in Device Manager and turn off all VPN/Warp. Click Dual Spoof, select your motherboard and run. After the PC restarts, confirm the driver load popup, then re-enable the GPU.
• Install the game. After Vanguard anti-cheat requests a restart , reboot and run the spoofer again from the GPU disable step.

The HYPER-V FAILED error means Hyper-V is not active at the system level. Do the following:

• Enter your BIOS and make sure virtualization (Intel VT-x / AMD-V) is enabled.
• Ensure Hyper-V is enabled in Windows Features (not turned off).
• If the error persists after these steps, a clean Windows reinstall is the only reliable fix.

Yes, this is by design. The spoofer is active until the next PC restart. You need to re-run the spoof before each gaming session.

Synchronize your Windows system clock rather than changing the time manually. Go to Settings → Time & Language → Date & Time and click "Sync now". Also verify that your time zone is set correctly , incorrect region settings can interfere with synchronization.

Error 152 means the account has already been flagged by the anti-cheat. Create a new account with a new email address , the flagged account cannot be used.

On first login with the new account, complete the tutorial, press Safe Exit, then re-spoof before playing normally.

Before launching the game, completely delete the loader from your PC and reboot. This clears all active cheat-related processes that the anti-cheat may detect. Never leave the loader running in the background when you are not using it.

If the loader hangs after successful authorization and nothing happens:

• Make sure you launch the cheat before starting the Valorant game.
• Try enabling a VPN and restarting the loader.
• Synchronize Windows time: Settings → Date & Time → "Sync now".
• If the issue persists, contact support , the situation is escalated to the developer.

If Valorant shows popup errors due to disabled TPM/Secure Boot, use the built-in tools in the VGC Emulator tab in this order:

• Click TPM Spoofer.
• Click Popup, launch Valorant and find a match.
• Play one full round. At the start of the second round, click Safe Exit , the game will close.
• Click TPM Spoof again, then click VGC Emulate and launch the game.
• After each match, press Safe Exit and repeat the procedure.

If the launcher fails to download, try two things: enable a VPN and retry, or switch to a different browser (e.g., from Chrome to Firefox or vice versa).

If the launcher fails to download, try two things: enable a VPN and retry, or switch to a different browser (e.g., from Chrome to Firefox or vice versa).

If the launcher fails to download, try two things: enable a VPN and retry, or switch to a different browser (e.g., from Chrome to Firefox or vice versa).

If the launcher fails to download, try two things: enable a VPN and retry, or switch to a different browser (e.g., from Chrome to Firefox or vice versa).

If the launcher fails to download, try two things: enable a VPN and retry, or switch to a different browser (e.g., from Chrome to Firefox or vice versa).

This issue occurs when the cheat is not launched correctly. Follow the official video guide strictly , the order of steps matters. Launching the cheat out of sequence can cause the menu to display incorrectly or stop working altogether.

The cr3 0x0000000000000000 error means the loader cannot access virtualization. To diagnose:

• Download the Sordum utility (archive password , sordum), run it, and click Search.
• Send a screenshot of the results to support , this will show whether virtualization and Hyper-V are correctly enabled.

The Euphon menu is displayed via the Discord overlay. If it does not appear:

• Open Discord Settings → "Game Overlay" → enable "Enable in-game overlay" and disable "Use legacy overlay".
• In the same tab, make sure the overlay is initialized for Valorant. If not, switch the game to Windowed or Borderless Windowed mode.
• Enable "Hardware Acceleration" in Discord settings (find it via the feature search).
• The menu is opened with the INSERT key. On compact keyboards without Insert: Win+R → osk → use the virtual Insert key.

Make sure the triggerbot is enabled in the cheat interface (the activation toggle must be set to on). Verify that the selected crosshair color (e.g. purple for Valorant) matches the actual enemy highlight color shown in-game.

If hotkeys still don't respond, try rebinding them to different keys in the cheat settings. Experimenting with the configuration options often resolves the issue , several users fixed it by adjusting the settings manually.

If the cheat menu is open but ESP features are not showing in game, press F5 in the cheat menu , this activates rendering. Make sure all desired options are enabled in the menu.

If pressing F5 has no effect, send a screenshot of the cheat console to support for diagnosis.

If the wallhack does not update automatically , check the refresh interval setting inside the cheat. This is known behavior in certain configurations; users reported improvement by switching the enemy highlight color inside the game (yellow worked best for some).

If the aimbot hits the body instead of the head , make sure the target bone is set to "head" in the cheat settings, not "body" or "nearest." Also note that triggerbot and aimbot are separate features , confirm which mode is actually active.

Enter your activation key in the cheat and submit the HWID request directly through the cheat's interface , the corresponding option is found inside the program itself.

This is a conflict between the Vanguard anti-cheat and the cheat software. The cheat requires Core Isolation (HVCI) to be disabled. Go to Windows Security → Device Security → Core Isolation, turn it off, and reboot your PC before launching the cheat.

If you still see HVCI Status: 1 or ERROR: Hyper-V Failed , try disabling Hyper-V in BIOS and via CMD: bcdedit /set hypervisorlaunchtype off, then reboot. If Vanguard then blocks the game , try a VPN and re-run the loader.

As a last resort, a clean Windows reinstall followed by configuring settings before the first Vanguard launch resolves this.

Disabling an antivirus is not enough , it must be fully uninstalled. Make sure to remove: Kaspersky, Avast, 360 Total Security, Faceit AC, GameGuard, AnticheatExpert.

• To fully disable Windows Defender, use the Sordum Defender Control utility: download the archive (password: sordum), run it, click Search, wait for it to finish, then send a screenshot of the result to support.
• After removing antivirus software, restart your PC before launching the loader.

Both must be disabled in BIOS. Before using the spoofer, enter your BIOS and turn off TPM (Trusted Platform Module) and Secure Boot. Without this the spoofer will not work correctly.

The guide on the official website is authoritative , if it conflicts with other sources, follow the site guide.

Enable virtualization directly in BIOS/UEFI , the Windows Task Manager entry only reflects the current state and may not appear if the feature is disabled at the BIOS level.

After enabling it, reboot and launch the loader again. Send a screenshot of the loader screen to support so they can confirm all parameters are correct.

The cheat emulates Secure Boot, so you do not need to physically disable it. Keep Secure Boot enabled in your BIOS.

• If you get a launch error, reset Secure Boot keys in BIOS settings (look for "Reset Secure Boot keys" or similar).
• Run Discord as administrator and enable the legacy overlay in Discord settings.
• For diagnostics, use the Sordum utility: download the archive (password , sordum), run it, click Search, and send a screenshot of the result to support.

Valorant uses the kernel-level Vanguard anticheat. Before launching the cheat:

• Make sure all third-party anticheat software is removed (Faceit AC, GameGuard, etc.).
• Update the game through the official Riot launcher , an outdated game version can cause injection failures.
• Always launch the loader before starting the game.